N1 to CZ OEM Adapter
ActiveRev A.1
The N1 to CZ OEM Adapter is an adapter board that enables compatibility between the N1 flight controller and Control Zero OEM carrier boards. It maps the N1 connector pinout to the Control Zero OEM interface, allowing the N1 to be used as a drop-in flight controller solution within Control Zero based systems without requiring custom cabling or board modifications.
The N1 has more ports enabled than the CZ OEM so this board has a set of solder jumpers to select the preferred mapping to N1.
Specifications
Section titled “Specifications”| Mechanical Specifications | |
|---|---|
| Dimensions | 35 mm x 20 mm 1.378” x 0.787” |
| Mated height (with N1) | 9.6 mm 0.378” |
| Weight | 3.7 grams 0.131 oz |
| Ports | |
|---|---|
| Control N1 | CZOEM |
| S1 | USART2 |
| S2 | USART3 |
| S3 | (USART6) |
| S4 | USART4 |
| S5 | USART7 |
| S6 | USART8 |
| S7 | (RCin) |